| Community MVP-18S |
| Subwoofer-Trapezoidal, carpeted, full-range, portable loudspeaker systems |
 |
|
|
 |
| |
 |
| |
 |
|
|
| MSRP: |
|
$779.00 |
| Discount: |
|
$ |
| Your
Price: |
|
$475.00 |
|
| |
|
| |
| Additional
Information |
|
 |
 |
 |
 |
 |
 |
|
|
| Description |
|
New Community DnD and MVP Loudspeakers, purchased from an authorized Community dealer in the USA , carry a limited ‘no fault' warranty for the first two (2) years of use on the loudspeaker and crossover components only. New Community DnD and MVP loudspeakers are also warranted against defects in material and workmanship under normal use for the first five (5) years of use.
Thinking it's time to get serious about your sound?
Then you're ready for Community's new MVP Series II loudspeakers. Combining the high-output intensity of raw acoustic power with unrivaled sonic clarity, the product group brings professional-quality sound reinforcement to DJs, bands, and anyone else demanding the best in audio.
The MVP18S is a rugged, high-sensitivity, subwoofer system. The system utilizes one 18" woofer for solid bass and excellent power handling capability. This transducer is matched to an optimally tuned direct-radiating bass-reflex enclosure. The system is specifically designed for easy pole mounting of MVP full-range systems with an integral 1 3/8" diameter stand socket on top. The recessed handles, black carpeted exterior and injection molded corners also make this system attractive and rugged.
APPLICATIONS:
- SOUND REINFORCEMENT/PORTABLE PA
- CLUBS/DJ
- BANDS
- HOUSES OF WORSHIP
- PERMANENT INSTALLATION
- SPORT FACILITIES & HEALTH
- CLUBS
- RENTAL SYSTEMS
- KARAOKE
Specifications (See notes 1 and 2)
- Loudspeaker Type: Subwoofer
- Operating Range: 40 Hz - 250 Hz
60 Hz - 150 Hz (+/-3dB)
- Max Input Ratings: 300W continuous, 750W program
49 volts RMS, 110 volts momentary peak
- Recommended Power Amplifier:
For maximum SPL: 600W to 900W @ 8 Ohms
- Sensitivity 1W/1m: 98 dB SPL (50 Hz - 160 Hz 1/3 octave bands)
- Maximum Output: 123 dB SPL / 130 dB SPL (peak)
- Nominal Impedance: 8 Ohms
- Min Impedance: 6.4 Ohms @ 40 Hz
- Nominal -6dB Beamwidth: 360° H x 360° V
- Axial Q / DI: 1 / 0, 40 Hz - 150 Hz
- Recommended Signal Processing:
100 Hz - 150 Hz electronic crossover
40 Hz High pass filter
- Drivers: LF (1) 18"
- Driver Protection: None
- Input Connection: (1) 1/4" jack
(2) Locking Connectors
- Output Connection: (1) 1/4" 150 Hz highpass
- Controls: None
- Enclosure: MDF
- Enclosure Hardware: (2) Recessed handles
(8) Interlocking corner protectors
(4) Rubber feet
- Mounting / Rigging Provisions:
(1) 1 3/8" top mount pole socket
- Grille: 16 gauge perforated steel
Dimensions:
- Height: 34.3”
- Width: 18”
- Depth: 19.2”
- Shipping Weight: 96 lb.
1. Sensitivity: Free field pink noise measurement at 4 ft / 1.2 m at 60% power; extrapolated to 1 meter and an input of 2.83 volts R.M.S.
2. Watts: All wattage figures are calculated using the rated nominal impedance |
| |
|
|
| |
|
|
 |
|
 |
|
|
|
