| Community MVP-12 |
| Two Way Trapezoidal Loudspeaker With 90° X 40° HF Horn |
 |
|
|
 |
| |
 |
| |
 |
|
|
| MSRP: |
|
$439.00 |
| Discount: |
|
$ |
| Your
Price: |
|
$275.00 |
|
| |
|
| |
| Additional
Information |
|
 |
 |
 |
 |
 |
 |
|
|
| Description |
|
New Community DnD and MVP Loudspeakers, purchased from an authorized Community dealer in the USA , carry a limited ‘no fault' warranty for the first two (2) years of use on the loudspeaker and crossover components only. New Community DnD and MVP loudspeakers are also warranted against defects in material and workmanship under normal use for the first five (5) years of use.
Thinking it's time to get serious about your sound?
Then you're ready for Community's new MVP Series II loudspeakers. Combining the high-output intensity of raw acoustic power with unrivaled sonic clarity, the product group brings professional-quality sound reinforcement to DJs, bands, and anyone else demanding the best in audio.
The MVP12 is a rugged, high-sensitivity, two-way, full-range loudspeaker system. The system utilizes one HF20 proprietary high-frequency compression driver coupled to an exponential horn and one 12" woofer for high sensitivity and excellent power handling capability. These components are matched to an optimally tuned direct radiating bass reflex enclosure. The recessed handles, black carpeted exterior and injection molded corners also make this system attractive, rugged and easily transportable.
APPLICATIONS:
- SOUND REINFORCEMENT/PORTABLE PA
- CLUBS/DJ
- BANDS
- HOUSES OF WORSHIP
- PERMANENT INSTALLATION
- SPORT FACILITIES & HEALTH CLUBS
- RENTAL SYSTEMS
- KARAOKE
Specifications
- Loudspeaker Type: Two-way, full-range
- Operating Range: 70 Hz - 16 kHz
80 Hz - 14 kHz (+/-4.5dB)
- Max Input Ratings: 150W continuous, 375W Program
35 volts RMS, 77 volts momentary peak
- Recommended Power Amplifier:
For maximum SPL: 310W to 450W @ 8 Ohms
- Sensitivity 1W/1m:
94 dB SPL (80 Hz - 12.5 kHz 1/3 octave bands)
94 dB SPL (250 Hz - 4 kHz speech range)
- Maximum Output: 116 dB SPL / 123 dB SPL (peak)
- Nominal Impedance: 8 Ohms
- Min Impedance: 3.9 Ohms @ 10570 Hz
- Nominal -6dB Beamwidth:
90° H (+29° / -47°, 2 kHz - 12.5 kHz)
40° V (+25° / -12°, 2 kHz - 12.5 kHz)
- Axial Q / DI: 15.5 / 11.9, 2 kHz - 12.5 kHz
- Crossover Frequency: 2 kHz
- Recommended Signal Processing: 70Hz high pass filter
- Drivers: LF (1) 12"
HF (1) HF20 compression driver,
non-metallic diaphragm, Ferrofluid-cooled
- Driver Protection: Dyna-Tech
- Input Connection: (2) 1/4” jacks, (2) Locking Connectors
- Controls: Mid-Range Boost Switch
- Enclosure: MDF
- Grille: 16 gauge perforated steel
Dimensions:
- Height: 20.9”
- Width (front): 14.5”
- Width (rear): 10.5”
- Depth: 13.8”
- Shipping Weight: 38 lb.
|
| |
|
|
| |
|
|
 |
|
 |
|
|
|
