| Community DnD12 |
| Full-range, carpeted, portable loudspeaker systems |
 |
|
|
 |
| |
 |
| |
 |
|
|
| MSRP: |
|
$259.00 |
| Discount: |
|
$ |
| Your
Price: |
|
$199.00 |
|
| |
|
| |
| Additional
Information |
|
 |
 |
 |
 |
 |
|
|
|
| Description |
|
New Community DnD and MVP Loudspeakers, purchased from an authorized Community dealer in the USA , carry a limited ‘no fault' warranty for the first two (2) years of use on the loudspeaker and crossover components only. New Community DnD and MVP loudspeakers are also warranted against defects in material and workmanship under normal use for the first five (5) years of use.
A multi-angle cabinet which can be employed as a stage monitor at either of two angles or in a traditional upright fashion, the DnD12 is a two-way, full-range device equipped with a 12-inch woofer at the low-end and a Focused Array™ high frequency section utilizing a dual-driver pattern control horn.
Community's PowerSense Plus™ dual-stage protective circuitry safeguards both DnD loudspeakers, providing an automatic fail-safe defense against driver damage resulting from overpowering. Each DnD enclosure is covered with durable black carpeting, and additionally features a perforated steel grille, stand socket, and three mounting points.
APPLICATIONS:
- Sound Reinforcement / Portable PA
- Clubs / DJ
- Sport Facilities & Health Clubs
- Keyboard Systems
- Rental Systems
- Monitor Systems
Specifications (See notes 1 and 2)
- Loudspeaker Type: 2-way, full-range
- Operating Range: 50 Hz - 16 kHz
- Max Input Ratings: 150W Continuous, 400W Program
35 volts RMS, 80 volts momentary peak
- Recommended Power Amplifier:
330W to 480W @ 8 Ohms
- Sensitivity 1W/1m:
97 dB SPL (100 Hz - 12.5 kHz 1/3 octave bands)
98 dB SPL (250 Hz - 4 kHz speech range)
- Maximum Output: 119 dB SPL / 126 dB SPL (peak)
- Nominal Impedance: 8 Ohms
- Min Impedance: 6.8 Ohms @ 60 Hz
- Nominal -6dB Beamwidth:
90° H (+14° / -41°, 2 kHz - 12.5 kHz)
40° V (+12° / -14°, 2 kHz - 12.5 kHz)
- Axial Q / DI: 21.6 / 13.3, 1 kHz - 12.5 kHz
- Crossover Frequency: 2 kHz
- Recommended Signal Processing:
60 Hz high pass filter
- Drivers: LF (1) 12"
HF (2) 1" exit
- Driver Protection: PowerSense Plus™
- Input Connection: (1) Locking Connector
(2) 1/4” jacks
- Controls: none
- Enclosure: Black carpeted, 18mm particle board
- Enclosure Hardware: (3) Rubber feet
(4) Corner protectors
- Mounting / Rigging Provisions:(3) 5/16-18 hanging points
- Grille: 18 gauge perforated steel
Dimensions:
- Height: 22.4 in.
- Width: 13.9 in.
- Depth: 14.1 in.
- Shipping Weight: 38 lb.
1. Sensitivity: Free field pink noise measurement at 40 ft / 12.2 m at 60% power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance. |
| |
|
|
| |
|
|
 |
|
 |
|
|
|
