 |
| |
 |
| |
 |
|
|
| MSRP: |
|
$349.00 |
| Discount: |
|
$ |
| Your
Price: |
|
$199.00 |
|
| |
|
| |
| Additional
Information |
|
 |
 |
 |
 |
|
|
|
|
| Description |
|
AT-3035
Large-Diaphragm Cardioid Condenser Microphone
Designed for critical home/project/professional studio applications and live performance, this 30 Series large-diaphragm side-address cardioid condenser delivers exceptional detail and low noise. With its extended low-frequency response, the AT3035 produces rich, full sound reproduction and handles extremely high sound pressure levels with ease. Tailored for a smooth, natural sound, this mic is a perfect complement for digital recording equipment. Along with its rugged construction and high-performance specifications, the AT3035 provides an exceptional level of consistency from model to model.
- Custom-engineered large diaphragm for exceptional detail and low noise
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- High max SPL, wide dynamic range and optimized output level provide unmatched versatility
- Low self-noise (12 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment
- Extended low-frequency response for rich, full sound
- State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
- Custom shock mount provides superior isolation
- Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
SPECIFICATIONS |
| |
| ELEMENT |
Fixed-charge back plate, permanently polarized condenser |
|
| POLAR PATTERN |
Cardioid |
|
| FREQUENCY RESPONSE |
20-20,000 Hz |
|
| LOW FREQUENCY ROLL-OFF |
80 Hz, 12 dB/octave |
|
| OPEN CIRCUIT SENSITIVITY |
-32 dB (25.1 mV) re 1V at 1 Pa |
|
| IMPEDANCE |
250 ohms |
|
| MAXIMUM INPUT SOUND LEVEL |
148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL, with 10 dB pad (nominal) |
|
| NOISE |
12 dB SPL |
|
| DYNAMIC RANGE (typical) |
136 dB, 1 kHz at Max SPL |
|
| SIGNAL-TO-NOISE RATIO |
82 dB, 1 kHz at 1 Pa |
|
| PHANTOM POWER REQUIREMENTS |
11-52V DC, 3 mA typical |
|
| SWITCHES |
Flat, roll-off;
10 dB pad (nominal) |
|
| WEIGHT |
13.8 oz (390 g) |
|
| DIMENSIONS |
6.69" (170.0 mm) long,
2.05" (52.0 mm) maximum body diameter |
|
| OUTPUT CONNECTOR |
Integral 3-pin XLRM-type |
|
| ACCESSORIES FURNISHED |
AT8458 shock mount for 5/8"-27 threaded stands; soft protective pouch |
|
| AUDIO-TECHNICA CASE STYLE |
R5 |
|
|
| |
|
|
