b.) Connect your various signal sources to the appropriate Inputs on the MacroMIX with unbalanced shielded cables. Electric instruments or amplifier line outputs would go to the 1/4” input on channel 3 and/or 4. Stereo sources (tape deck, CD player, etc.) would be connected to the RCA Inputs on channels 1 and 2.
c.) Connect mono headphones to the Line/Headphone output. Alternatively, this jack can be connected to the mono input of a powered monitor speaker or a headphone amplifier if added headphone loudness is required.
d.) Connect the MacroMIX’s dual mono RCA Outputs to the L&R inputs on your tape deck, PC, or a PA mixer with input.
e.) Adjust the Level controls for the desired mix.