 |
| |
 |
| |
 |
|
|
| MSRP: |
|
$80.00 |
| Discount: |
|
$ |
| Your
Price: |
|
$65.00 |
|
| |
|
| |
| Additional
Information |
|
 |
 |
 |
|
|
|
|
|
| Description |
|
A simple device which provides 4 channel of amplification, each individual volume controls capable of directly driving up to 8 headsets simultaneously.
The HeadAmp4 offers 1/8th-inch as well as 1/4-inch inputs and outputs as well as lower noise, lower distortion and more output in a new custom extruded stackable metal case.
Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source.
Individual level controls for the four headphone outs, 1/4-inch and now 1/8th-inch connections allow the HeadAmp4 to connect to virtually any source, and drive any headphone configuration including studio phones, in-ear monitors or custom ear pieces or any combination of the above.
ARTcessories are taking the audio world by storm and quickly becoming a popular brand with musicians, DJs and studio engineers everywhere around the World. Split, combine, mix, power... you name it. On stage, in the studio, in your living room, they’re easy to use and are built to last. For those times when you need a little box to fix a big need or to make more out of a smaller project, ARTcessories has you covered. You’ll discover a robust line of useful tools which include a complete range of direct boxes, headphone amps, small mixers, mic cable combiner/splitters and much more. ARTcessories are designed to deliver affordable solutions for a multitude of audio needs for any size project.
Usage:
- Connect the included AC power adaptor to the HeadAMP4 DC input jack and plug the AC Adaptor into an appropriate AC mains power outlets
- Connect the stereo line-level output and headphone output from a mixer, tape deck, CD player, another headphone amplifier, etc. to the HeadAMP4 stereo input using a low noise stereo T/R/S (Tip, Ring, Sleeve) patch cord.
- A monaural source, such as a mixer's monitor output, can be connected to HeadAMP4 input by using a mono T/S to Stereo T/R/S patch cord or adaptor. (The stereo T/R/S plug would have the Tip and Ring tied together so that the same mono signal is input to both the left and right channels. With an un-modified stereo cord attached, sound will be present in one ear only.)
- Connect headphones to the output jacks and adjust the volume controls as required.
Specifications:
- 4 output channels each with it's own volume control
- Stereo 1/4”and 1/8" input jack (wired in parallel) can be connected to any line-level or headphone amp output
- Four stereo 1/4” and four 1/8" headphone outputs
- Power on LED
- Maximum Input Level: +14dBV
- Maximum Output Level: 20dB per channel
- Output Impedance: 47 Ohms per channel
- S/N Ratio: >90dB
- THD: <0.01%
- IMD (SMPTE): 0.01%
- Power: 12V DC (Adapter included)
- Dimensions: 1.75" x 4.2" x 3.5" (44.5mm x 107mm x 89mm)
|
| |
|
|
